Maximum volume size: 32 GB / 2 TB on FAT32, 128 PB on ExFAT and 232 clusters on NTFS Maximum number of files on one volume: 4194304 on FAT32, almost infinite on ExFAT and 4,294,967,295 on NTFS Maximum size of one file: 4 GB on FAT32, 16 EB on ExFAT and 16 Terabytes on NTFS Built-in security: Absent on FAT32, minimal on ExFAT and present on NTFS Likelihood of lost data being recovered: Non-existent on FAT32, low on ExFAT and high on NTFS
The following is a summary of the performance of each of these three file systems, taking into account the numbers, the statistics and the results of testing: FAT32: Best performance on small storage volumes. ExFAT: Best performance on small-large sized storage volumes but low performance on storage volumes with large amounts of files and data. NTFS: Best performance on storage volumes of all sizes with any amount of files and data. Going deeper into this bout of the three most commonly used file systems of today’s day and age, below is a detailed description of and comparison between these three file systems, along with lists of storage devices that each of these file systems should be used on.
FAT32
The FAT32 is the most aged file system out of the three file systems that the computers of today are compatible with. The roots of FAT32 go all the way back to the world’s MS DOS days as FAT32 is basically a (highly) improved version of the FAT file system that was used in MD DOS. Unfortunately, the reason why FAT32 continues to become more and more obsolete is because it is a 32-bit file system, and as that is the case, cannot store any files that exceed 4 gigabytes in size. FAT32 was initially designed to be used on USB flash drives and still remains the most widely used file system on USBs. If you’re wondering why the world has not yet switched to using the much better ExFAT file system on USBs, it’s because not all devices that a USB flash drive can be plugged into have not yet become ExFAT-compatible. Even though FAT32 is a fairly mature file system, if you have read files from or written files to any USB flash drive in the past 5 years or so, you will know that while it’s nowhere near as good as its competition it is not incredibly sluggish either. If you are only going to be dealing with a relatively small amount of files that (none of which exceed 4 Gigabytes in size) on a USB, the FAT32 file system will do a pretty good job, and that is why people are still using it and are not pushing for widespread ExFAT compatibility too aggressively.
Storage devices that should use FAT32:
USB flash drives
NTFS
NTFS is the most popular and most widely used file system out of the three file systems that our relevant today. NTFS was introduced by Microsoft with the Windows NT Operating System and has continued to be the resident file system for all versions of the Windows OS that have come out since then. For reasons that will be described henceforth, the NTFS file system is considered to be superior to all versions of the HPFS and FAT file systems, although the fairly new ExFAT file system does give NTFS a run for its money in specific areas. NTFS uses a b-tree directory scheme to keep track of file clusters, and the information pertaining to a specific file’s clusters is stored with every single one of its clusters instead of a governing table (like in FAT32 and ExFAT), making the location and retrieval of data significantly quicker. The NTFS file system was basically designed to be used on HDDs, and since people are known to store extremely large files on HDDs, NTFS storage devices not only function but actually thrive when filled up with a large number of files and a huge amount of data. The file system caching capabilities of NTFS are quite superior as compared to the competition and the fact that it creates metadata for each and every file allows it to access stored data almost instantly. In addition, to top it all off, unlike FAT32 and ExFAT, NTFS comes with built-in file compression. It should also be noted that if you’re planning on installing a Windows Operating System to an HDD or SSD, it MUST use the NTFS file system as Windows cannot be installed on a drive that uses any other file system. NTFS is built to withstand as much heat as you can throw at it, which is why it uses most of its resources and performs at its best when it is put to work on a storage drive that has a large number of files and folders and a lot of data for the file system to sort through and manage. Also, in the event that there is an abrupt shutdown while reading from or writing to an NTFS drive, there is a pretty good chance that little to none of your data will be lost.
Storage devices that should use NTFS:
Any storage device/drive that you plan on installing a version of the Windows OS on Hard Disk Drives (HDDs) – both internal and external SSDs that you plan on storing a massive amount of medium-large sized files on (basically SSDs that exceed 1 Terabyte in maximum capacity)
ExFAT
ExFAT is the file system that Microsoft designed to (presumably) bridge the massive gap between FAT32 and NTFS. While ExFAT is a tremendous improvement over FAT32, it loses shamefully to NTFS in areas such as normalized average performance (which is basically all that counts), writing a large number of small files, reading a large number of small files, duplicate file search operations and file deletion operations. However, ExFAT does manage to match up to (and, by a small margin, even beat) NTFS in select areas such as when writing medium-sized files, reading medium-sized files and writing a small number of large files, among a couple of others. The ExFAT file system is significantly more fragile as compared to NTFS, increasing the chances of you losing your data in the event of a sudden system shutdown during a read or write operation. ExFAT drives also get slower as more data is installed on them as it starts taking them longer to locate and access the data you are looking for. However, on the bright side, ExFAT is golden in terms of compatibility as even though Windows cannot be installed on an ExFAT storage device, almost all computer Operating Systems out there – including Windows and OS X – can read from and write to an ExFAT storage device. The ExFAT file system is primarily designed for external hard drives and, more importantly, is highly optimized for flash storage devices such as Solid State Drives (SSDs) and USB flash drives. ExFAT is a 64-bit file system – unlike FAT32, its 32-bit predecessor – which means that it is capable of storing files larger than 4 Gigabytes. All things considered, ExFAT is ideal for file storage on external drives and flash storage devices and will be best suited for you if you will be working with thousands of files regardless of how small or large they are. However, keep in mind that the more data you store on an ExFAT storage device, the slower it will become when performing read, write and delete operations.
Storage devices that should use ExFAT:
USB flash drives on which you want to store files which, individually, are greater than 4 Gigabytes in size SSDs that you do not plan on storing an INSANELY large amount of data on (basically SSDs with a maximum capacity of less than 1 Terabyte). External HDDs that you won’t be storing a lot of data on but will be using on more than one kind of Operating System.
How to Convert FAT32 to NTFSFAT32 Volume Limitations Cause Issues for Windows 10 Users with Embedded DevicesHow to Format a USB Drive to FAT32How to Format a Drive as exFAT on Linux
