However, installing it or updating your previous version of Windows OS was difficult for plenty of users and some of them were even forced to five up simply because of the fact that they were unable to get rid of a single error message which appeared on screen. We have created an article for one of the issues you may encounter so please read on!
Windows 10 Installation Error “We couldn’t create a new partition”?
This particular error message usually appears when users try to install Windows 10 from a bootable DVD or USB drive and it freezes the process before it even started. It can also occur if you want to update your previous version of Windows to Windows 10 and it has been bugging plenty of users for quite a long time.
Luckily, the fix for this problem is not impossible to find but you may have to try out a lot of different methods before you are able to get rid of the problem. Check out the instructions below in order to get started.
Solution 1: Using “diskpart” In Order to Create a New Partition
If the Windows 10 updating wizard was unable to create a new partition on your hard drive where Windows 10 may be installed as an additional operating system, you might have to make it yourself using Command Prompt. The process is simple to comprehend and it should fix your problem easily. Note: Before we start this process make sure that you don’t have any SD Cards connected to your PC. We have to warn you that this process will delete all files from your hard drive, so if you’re planning to use it, make sure you create a backup beforehand. To run diskpart, follow these steps: disk 0 clean disk 0 create partition primary disk 0 active disk 0 format fs=ntfs quick disk 0 assign
- Enter exit in order to close Command Prompt. 9. Start the installation process again. Note: If you computer is unable to boot from your USB or DVD bootable drive, you might need to tweak your boot settings in order to disable certain security features which prevent your PC from booting from anything else other than the drive with Windows installed on it. If this problem occurs for you, follow the instructions below to fix it. If you are not sure how to boot from your DVD or USB, you need to know just which option to select when the boot menu opens. It will ask you from which device you want to boot your computer. Follow the instructions below to boot from your DVD or USB easily. Note: No text field displays for the code. This is expected behavior. When you type the numbers, the code is logged without a text field.
Solution 2: Set the Partition You Want to Install Windows to as the Primary One
If you receive this particular error message while trying to install Windows 10 on your computer, you may need to set the partition of your choice as the primary one on your computer. This is also achieved using the diskpart tool in Command Prompt.
Solution 3: Disconnect Every Storage and Peripheral Device From Your Computer
When you encountered this error message, it’s probably because there are some peripherals connected, such as an external HDD, SSD, USB thumb drive/flash drive or an SD card. Just remove and disconnect all external storage drive from the USB port. If you’re using USB drive containing setup files to install OS, reconnect only the bootable USB drive and start again. To make this clear, only leave the device which is necessary for your installing process since other devices may cause incompatibility issues with your computer. Note: Many users reported “We couldn’t create a new partition” error message while trying to install Windows 10 on a SSD. According to users, in order to fix this issue you’ll have to disconnect all other hard drives and leave only your SSD drive connected. Alternatively, you can try disabling all other hard drives except for your SSD from BIOS. After you’ve disabled or disconnected all other drives, the SSD should be recognized by installer. Now all that you have to do is to delete all partitions on your SSD and Windows 10 should install without any problems.
Solution 4: Use a USB 2.0 Storage Device
Users have reported that they were struggling to install Windows from USB 3.0 devices even though their computers support it by default. However, using a USB 2.0 flash drive seemed to fix the issue for them which might mean you need to purchase a different USB drive. It’s usually your BIOS which doesn’t support USB 2.0 and not your computer. Motherboards which support USB 3.0 without any drivers installed are rare no matter how new they might be.
How to Fix Photoshop Being Unable to Create New Files or Open Existing OnesWhat Happens to a BitLocker Encrypted Partition When Your OS Partition Is…How to Fix ‘Couldn’t Modify Partition Map’ in macOSFIX: Couldn’t Update the System Reserved Partition Error
